Proxxon 37040 DH 40 MICRO Planer

You looking to find the "Proxxon 37040 DH 40 MICRO Planer" Good news! You can purchase Proxxon 37040 DH 40 MICRO Planer with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $608.77 $564.00   

Product Feature

• Dust protected on/off switch
• Restart protection in case of power interruption
• 110 - 120V AC, 60Hz,150 watt equals 6000 rpm

Product Description

Perfect for fine planing work on soft and hard wood. An excellent machine for fine planing work with a particularly smooth finish for hardwood and softwood work pieces. Perfect size unit for all kinds of applications, where precision to a fraction of a millimeter is needed. The unit's load bearing components are all made of die-cast aluminum, with milled seats for bearings and spindles, being essential for vibration-free, smooth and clean planing, guaranteeing maximum stability. The triple spindled table is milled to close tolerances and can be conveniently adjusted to 0.1 mm (0.008") by a large zero adjustable hand wheel on top of the housing. The cutter shaft has two HSS reversible cutters for a particularly long service life. Replacement of the cutters is facilitated by means of a generously sized service flap. The planer has an automatic feed unit. The work piece therefore is only pushed by hand into the feed slot for a short distance. A knurled and spring-loaded roller then draws the work piece in, thus enabling even irregularly shaped pieces of wood to be planed. After passing the cutter shaft the piece of wood is pushed out at the rear by a rubber-coated roller to protect the surface of the work piece. The unit has a dust-protected on/off switch with restart protection in case of power supply interruption. Replacement Cutters Made from HSS, 82 mm long. Technical Data: 115 V, 60 Hz, 115 hp (150 W), 6,000 rpm. Feed speed: 4.8 m/min, Max. pass-through height: 40 mm (1 37/64"), Max. pass-through width: 80 mm (3 9/64"), Length of planing table: 232 mm (9 1/8"), Planing cutter length: 82 mm (3 7/32"), Chip decrease: up to 0.8 mm (1/32"), Overall size: 280 x 230 x 235 mm (11 x 9 x 9 1/8"), Weight: approx. 8.0 kg (17.6 lb), Double insulated Note: For better planning results, take a little off your timber at a time. All new tools come with a 2 year f

Proxxon 37040 DH 40 MICRO Planer Review

I have this for guitar fingerboards. When it works it works great. However the auto feed often does not work. It will pull the wood in then get stuck and burn a nice divot in the piece. Unfortunately this happens about 50% of the time. One day it works fine the next it just plain will not feed the wood. Very frustrating considering it is not a cheap unit. I paid for this what I paid for my large 15" planer. The whole point of it is to work thin fingerboard stock that might get chewed up in the big machines. Unfortunatley this Proxxon unit is just too unpredictable. A shame as when it functions the finish is nice and smooth. Better off piggybacking thru the regular planer than dealing with this insanity.

Also the inner gears are plastic.

Most of the consumer Reviews tell that the "Proxxon 37040 DH 40 MICRO Planer" are high quality item. You can read each testimony from consumers to find out cons and pros from Proxxon 37040 DH 40 MICRO Planer ...