JET 708432K JDS-12DC 12-Inch 1 Horsepower Open Stand Disc Sander with Dust Canister, 115/230-Volt 1 Phase

You looking to find the "JET 708432K JDS-12DC 12-Inch 1 Horsepower Open Stand Disc Sander with Dust Canister, 115/230-Volt 1 Phase" Good news! You can purchase JET 708432K JDS-12DC 12-Inch 1 Horsepower Open Stand Disc Sander with Dust Canister, 115/230-Volt 1 Phase with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $475.99    

Product Feature

• Built-in dust collection with 2-micron filter
• 1 Horsepower Totally enclosed fan-cooled motor
• Open Stand
• Convenient brake slows disc quickly
• Circle Jig and Miter gauge included

Product Description

708432K Features: -Built-in dust impeller connects to canister filter to provide virtually dust free sanding.-Canister filter efficiently filters particles down to 2 microns.-Heavy duty steel sanding disc for even sanding.-Disc brake quickly slows disc for operator''s protection.-Tilting table has positive stops at 45 and 90 for sanding flat pieces or mitered angles.-Heavy duty steel open stand provides added support and stability.-Style: Open Stand.-Disc diameter: 12''''.-Motor current: 10 / 5 A.-Motor phase: 1 Ph. Specifications: -Powerful 1HP motor will sand even the toughest wood.-Motor power: 1 HP.-Motor voltage: 115 / 230 V.-Prewired voltage: 115 V. Collection: -Built-in dust collection means no need to setup a separate collection system.

JET 708432K JDS-12DC 12-Inch 1 Horsepower Open Stand Disc Sander with Dust Canister, 115/230-Volt 1 Phase Review

I'd been wanting to upgrade my (hobbyist) wood sanding capabilities for several months. I usually do a thorough research job online, then visit retailers who stock whatever I narrow down. This purchase was no exception, but $350 is a chunk of change for some of us, and my "work shop" has limited floor space.

After concluding that my belt sander could handle most 'long boards' and table tops effectively, I settled on a disc-only model, instead of a combo disc-belt model. The two features most important to me were, (1) a cast iron table that would accomodate a circle jig, and is rock steady when tilted to 45 degrees and (2) the ability to help me control dust. Horsepower was my third, and less important, consideration.

I'll tell you now, this machine is a 'hoss' in all three categories! This machine eats soft maple like a steak knife through warm butter! The table is large and quite heavy and secured by an adjustable stop (at 90) and two locking knobs on either side. It was dead on 90 degrees from the get-go (used an Incra 'Guaranteed Square"). All the hardware was there, instructions were easy to follow, parts (individually wrapped) fit nearly perfect, and setup took about 45 minutes from start to finish, including the stand & dust canister. Incidentally, Jet even includes a ground wire that clips from the body to the canister - to help prevent a flash fire, I suppose - but they're thinking ahead, none the less. The floor footprint is less than a yard square (guess-timate). The 80 (100?) grit adhesive paper was already installed on the cast iron disc plate. It's quiet and virtually vibration free.

The only minor downside (if there is one) aside from the $350 price tag, is that I expected the built-in impeller to act sort of like my dust collection system; it gets a lot of the dust but a little still escapes. Again, that was my own expectation, and not bad enough to reduce an otherwise powerhouse to a 4 star rating. The machine just drips with quality so much so, that I expect to pass this one down to my next of kin (hopefully, a long time from now).

Most of the consumer Reviews tell that the "JET 708432K JDS-12DC 12-Inch 1 Horsepower Open Stand Disc Sander with Dust Canister, 115/230-Volt 1 Phase" are high quality item. You can read each testimony from consumers to find out cons and pros from JET 708432K JDS-12DC 12-Inch 1 Horsepower Open Stand Disc Sander with Dust Canister, 115/230-Volt 1 Phase ...