Grizzly G0452Z Jointer with Spiral Cutterhead, 6 x 46-Inch

You looking to find the "Grizzly G0452Z Jointer with Spiral Cutterhead, 6 x 46-Inch" Good news! You can purchase Grizzly G0452Z Jointer with Spiral Cutterhead, 6 x 46-Inch with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $795.00    

Product Feature

• This 6-Inch Jointer has some of the most remarkable features found anywhere
• Starting from the ground up: built-in "kick-stand" mobile base just push the lever down push the machine where you want it and kick the lever back
• SPECIFICATIONS: • Motor: 1

Product Description

This 6" Jointer has some of the most remarkable features found anywhere. Starting from the ground up: built-in "kick-stand" mobile base built-in dust chute with 4" dust collection hood quick adjusting lever on the indeed table fine control hand wheel on the out feed table positive stop at 1/8" on the indeed table large 5" x 35" cast iron fence rack and pinion fence adjustment and an easy access switch with a removable safety key. SPECIFICATIONS: � � Motor: 1.5 HP 110V/220V single-phase 15A/7.5A prewired 110V � � Maximum stock width: 6" �� Maximum depth of cut: 1/8" • Maximum rabbeting capacity: 1/2" � Cutter head: Spiral with indexable carbide inserts � � Cutter head diameter: 2-1/2" � � Cutter head speed: 4800 RPM • Table size: 7-1/2" x 46" � � Table height from floor: 32-1/2" � Cuts per minute: 19 200 � Fence size: 5" H x 35" L � Fence adjustment: Positive stops @ 45-Degree and 90-Degree �� Overall dimensions: 46-1/4" L x 28" W x 49" H � � CSA certified versions may be available upon request � Approximate shipping weight: 268-Pound.

Grizzly G0452Z Jointer with Spiral Cutterhead, 6 x 46-Inch Review

Part I: 2 SEP 2013: This is my first power jointer and so far it's gotten off to a very rocky start. I'm still putting this thing together so I'll update my review later. The reason I'm writing this early segment is because the shipping was so bad the tool arrived missing parts and with damage to the cast iron table.

The packaging was completely inadequate for a something that was 150 plus pounds and the cardboard box arrived taped up, torn, styrofoam broken and leaking out of holes all over the package not to mention more than a few missing parts (bolts, nuts, etc...). To top it all off, UPS won't deliver the table to your house (the big box weighs 170 pounds-20 pounds above their weight limit), you'll have to go get it and the small box, the base, will be delivered by the truck.

The damage to the table may, or may not be fatal to the product. There was a rather large part of the corner of the table (about 1 1/2") crescent broken off either from being dropped or the other parts banging into it. Since this damage is below the table, even though unsightly and maybe it'll reduce the strength of the top, I think this may not be such big deal. The worse part is the table itself.

For a jointer to be of any use the table must be flat and stable. The pieces chipped out of the top are all along the edges but so far I'm not sure if that will interfere with flattening stock. Once I get it all together I'll update this and let folks know but as of right now I'd buy this some place local and go pick it up since that is what's going to happen anyway. I would ship this back but I have no idea how to send it back. The original packaging is destroyed and even if I wanted to ship it UPS they won't pick it up so I'd have to haul everything to a shipper who'll accept it.

Once I get the missing parts and finish putting this thing together I'll run some stock through it and see what happens. I'm guessing the edge joining should be okay (no real damage where the wood will pass). Flattening the face of the stock is a whole different matter. The edges are chewed and actually poke up above the table. That already tells me that anything six inches wide has a really good chance of getting gouged rendering that operation moot on this table. I may be crying wolf but before anyone else plunks down this much cash for such a machine and expects to have it shipped to their home, free of damage, you may wanna think twice. This for me, is the last time I order a major shop tool via Amazon.

Amazon wouldn't allow me to put a shipping and packaging review on this item so I'll say here and now that apparently this wasn't shipped by Amazon and none of this is apparently their fault even though it says the item is shipped and sold by Amazon. Whom ever did such a poor packing and shipping job it really is to bad. The part of the tool I have put together so far seems very sturdy and it looks like it should do a wonderful job. I guess I'll see.

Most of the consumer Reviews tell that the "Grizzly G0452Z Jointer with Spiral Cutterhead, 6 x 46-Inch" are high quality item. You can read each testimony from consumers to find out cons and pros from Grizzly G0452Z Jointer with Spiral Cutterhead, 6 x 46-Inch ...